de
page
IC-7610
Ham transceiver HF/50MHZ, 100 W, 99 channels, all modes, with 7 inch touch-screen TFT LCD with spectrum scope, dual watch function, FPGA based RF direct sampling, USB ports, Ethernet port, SD card slot for voice recording, screen capture, log file. Supplied with hand microphone and power supply cable. Any modification to the equipment not carried out by the ICOM France service department of ICOM France will invalidate the manufacturer's warranty.
-
Cliquez pour agrandir
-
Cliquez pour agrandir
Les + Produits
- RF direct sampling system (FGPA)
- Independent dual receiver
- 7-inch color display with touche screen function
- audio scope screen: FFT scope with waterfall
- Digital Pre-Distortion (DPD) for clean and linear transmission
- Built-in automatic antenna tuner
- 2 antenna connectors
- 2 audio outputs
- Output I/Q signals from the USB connector
- DVI-D connector for an external display
- SD card slot and USB port for saving data, logs, screenshots...
- Ethernet port
Microphones
SM-50
Unidirectional dynamic table microphone with 8-pin connector, PTT key with lock, switches [UP/DOWN] and low cut function [Low/Cut]. Output impedance: 55 Ohms ±30% (at 1 kHz). Microphone gain: -30 dB ±4 dB. Cable length (approx.): 1m. Requires an 8-pin mic plug adapter for workstations equipped with an RJ45 mic plug.
SM-J1
Omnidirectional and unidirectional desktop microphone designed for optimum operating comfort for base station transceivers. Dual dynamic microphone elements and selectable pickup patterns. Clear, rich voice reproduction in different operating environments. LOW-CUT filter, PTT switch and PTT LOCK function, four programmable function keys, and a footswitch connector for hands-free PTT operation. Compatible with 5/8-inch threaded boom arms with the detachable microphone unit. Adjustable microphone output level with supplied adjustment screwdriver. USB Type-C port for use as a PC microphone. Designed according to the common specifications of JAIA member manufacturers to ensure compatibility with Icom, Kenwood, and Alinco equipmentSupplied with an approximately 30 cm XLR cable between the microphone and stand, an approximately 1 m 8-pin metal connector cable between the stand and transceiver, a stand cap, and a microphone gain adjustment screwdriver.
Others
RC-28
USB controller for remote control from the USB port of compatible radio equipment or a PC. Usable with RS-BA1 remote control software. Adjustable setting sensitivity, no automatic setting (OFF/Low/High), two programmable keys for 4 functions, large PTT button. Supplied with USB-B to USB-A cable.
Softwares
RS-BA1 V2
IP remote control software (V2 version) to manage ICOM radios from a PC. Dualwatch operation with dual spectrum scopes. Covers most functions and modes. Low latency, high quality audio over an IP network. Optional USB remote encoder RC-28. Delivered on a CD or USB key depending on the version.;
Speakers
SP-41
External speaker featuring 4 audio filters, 5 W power output and 8 Ohms impedance, equipped with two tone selection switches (High: Cut/Wide and Low: Cut1/Cut2). The front panel includes an A/B audio input selector, a speaker On/Off switch, and a 6.35 mm (1/4") headphone jack. The rear panel is equipped with two 3.5 mm audio input jacks. Supplied with two 3.5 mm to 3.5 mm audio cables. Dimensions (W × H × D): 145 × 118 × 277 mm.
Others
IC-PW2
HF/50MHz all band 1kW linear amplifier, SO2R operation (Single Operator Two Radios), controller, touch screen color TFT LCD, 6 antenna connectors (antenna not supplied). Supplied with control cable, remote control cable, coaxial cable and accessory cable. RS-PW2 software for remote access available on Microsoft Store