de
page
IC-718
Ham radio HF all bands transceiver 0.5-30 MHz, 100W, 101 memory channels, LCD display and keyboard, front panel with standard IP-X4, USB LSB CW RTTY (FSK) AM modes, MIL-STD 810G compliant. Supplied with hand microphone, DC power cable and spare fuses
-
Cliquez pour agrandir
Les + Produits
- Superior basic performances and selectivity
- High output power
- Noise reduction function
- Selectable IF filter widths (3 levels)
- Automatic notch out of the filter
- Low distorsion microphone compressor
- Built-in VOX for handfree operations
- Built-in voice synthetizer
- Optional automatic antenna tuner AH-730 or AH-740 (for vehicle)
- User manual available both in English and French
Antennas
Microphones
SM-50
Unidirectional dynamic table microphone with 8-pin connector, PTT key with lock, switches [UP/DOWN] and low cut function [Low/Cut]. Output impedance: 55 Ohms ±30% (at 1 kHz). Microphone gain: -30 dB ±4 dB. Cable length (approx.): 1m. Requires an 8-pin mic plug adapter for workstations equipped with an RJ45 mic plug.
SM-J1
Omnidirectional and unidirectional desktop microphone designed for optimum operating comfort for base station transceivers. Dual dynamic microphone elements and selectable pickup patterns. Clear, rich voice reproduction in different operating environments. LOW-CUT filter, PTT switch and PTT LOCK function, four programmable function keys, and a footswitch connector for hands-free PTT operation. Compatible with 5/8-inch threaded boom arms with the detachable microphone unit. Adjustable microphone output level with supplied adjustment screwdriver. USB Type-C port for use as a PC microphone. Designed according to the common specifications of JAIA member manufacturers to ensure compatibility with Icom, Kenwood, and Alinco equipmentSupplied with an approximately 30 cm XLR cable between the microphone and stand, an approximately 1 m 8-pin metal connector cable between the stand and transceiver, a stand cap, and a microphone gain adjustment screwdriver.
Cords
Speakers
SP-41
External speaker featuring 4 audio filters, 5 W power output and 8 Ohms impedance, equipped with two tone selection switches (High: Cut/Wide and Low: Cut1/Cut2). The front panel includes an A/B audio input selector, a speaker On/Off switch, and a 6.35 mm (1/4") headphone jack. The rear panel is equipped with two 3.5 mm audio input jacks. Supplied with two 3.5 mm to 3.5 mm audio cables. Dimensions (W × H × D): 145 × 118 × 277 mm.
Others
IC-PW2
HF/50MHz all band 1kW linear amplifier, SO2R operation (Single Operator Two Radios), controller, touch screen color TFT LCD, 6 antenna connectors (antenna not supplied). Supplied with control cable, remote control cable, coaxial cable and accessory cable. RS-PW2 software for remote access available on Microsoft Store